A-shape or T-shape?
PEIJI TECH lists nine A-shape LED bulb options from 3–26 W and seven T-shape options from 9–60 W. Choose by lamp base, fitting clearance and listed lumens for the exact wattage.
Reviewed · PEIJI TECH product information
Start with the fitting and the available space
A-shape and T-shape describe the two bulb ranges shown here. Select the base that matches your lamp holder, then check the chosen wattage’s listed dimensions against the space in the fitting. A family name or wattage alone does not establish that the bulb will fit.
Read the dimensions correctly
For A-shape bulbs, the joint diameter is measured where the diffuser meets the housing. It is not the overall bulb diameter or the lamp-base designation. T-shape bulb diameter and A-shape joint diameter describe different measurements; do not compare them as if they were the same dimension.
A-Shape: listed wattage options
| Power | Luminous flux | Height | Joint diameter | Model |
|---|---|---|---|---|
| 3 W | 300 lm | 82 mm | 45 mm | A55 |
| 5 W | 500 lm | 86 mm | 50 mm | A55 |
| 7 W | 700 lm | 108 mm | 55 mm | A60 |
| 9 W | 900 lm | 115 mm | 55 mm | A60 |
| 12 W | 1200 lm | 120 mm | 55 mm | A65 |
| 15 W | 1500 lm | 125 mm | 65 mm | A70 |
| 18 W | 1800 lm | 142 mm | 71 mm | A80 |
| 20 W | 2000 lm | 180 mm | 80 mm | A95 |
| 26 W | 2600 lm | 210 mm | 90 mm | A110 |
T-Shape: listed wattage options
| Power | Luminous flux | Height | Bulb diameter |
|---|---|---|---|
| 9 W | 900 lm | 120 mm | 60 mm |
| 12 W | 1200 lm | 130 mm | 70 mm |
| 20 W | 2000 lm | 140 mm | 80 mm |
| 30 W | 3000 lm | 166 mm | 100 mm |
| 40 W | 4000 lm | 192 mm | 120 mm |
| 50 W | 5000 lm | 210 mm | 140 mm |
| 60 W | 6000 lm | 262 mm | 160 mm |
Example: replacing a bulb in an existing fitting
Record the lamp holder’s base, the available height and width, and the required light appearance. Compare the listed dimensions for your chosen wattage. For the A-shape range, obtain any additional overall clearance measurement your fitting requires rather than treating the joint diameter as the bulb’s widest point.
Use the listed lumens when comparing light output. Watts describe electrical power; they do not by themselves establish brightness. See the LED bulb questions for the distinction. Do not calculate missing lumen values from a family-wide figure.
Confirm the combination before ordering
- Choose A-shape or T-shape, and specify the wattage.
- State the required lamp base and colour temperature.
- Check the selected option’s dimensions and electrical requirements.
- Confirm the requested base, wattage and colour-temperature combination; family-level options do not establish every possible combination.
Use the LED bulb comparison tables and individual product details to build your inquiry.
Sources and scope
Product information and photos use PEIJI TECH’s listed specifications; these are not independent test results. Follow the selected model’s operating conditions and instructions. External sources explain general principles.

